seite10e

Sand Blasting Cabin SK 800 MB 2

This cabin is used wherever saw blades are produced in large quantities. As is clearly iltustrated in the photo, this machine is fitted with 2 loading and unloading sta-tions, i. e. 2 saw blades are automatically moved into position and sand blasted.It is important to mention here that the setting of the saw blade diameter does not necessarily have to be the same on both sides.As an example: On the left-hand side, saw blades with a diameter of 350 mm and on the right-hand side, saw blades of only 250 mm are sand blasted.The sand blasting time remains the same, but can be set between 0,1 and 5 minutes.We can optionally supply this cabin with or without an extraction system.

Technical data:

Dimensions: 2200 mm wide

1900 mm deep

2700 mm high

with the cylinder raised

Dimensions: 2850 mm wide

1900 mm deep

2050 mm high

with lowered cylinder and open loading doors

Air requirement: appr. 2000 litres/min. at 6 bar

Air requirement per nozzle: 500 litres/min

Sand blasting time: Optionally adjustable from 0,1 to 5 min.

Output: Examble: Saw blade diameter 360 mm, 54 teeth appr. 2 to 2,5 min.

54 teeth appr. 2 to 2,5 min.

Loading: loading and unloading time appr. 20 secs.

Drive: Saw blades are driven via gear motor at appr 2 revolutions per minute

Recommended blasting sand: Chilled cast shot, diamond 20 - 40

Recommended blasting sand quantity: For initial utilization 4 x 25 kg

Operating voltage: 230/400 Volts, 50 cycles

240/440 Volts, 60 cycles

Air connection: at least 3/4"

olour: Green hammertone finish, malachite green.

Other colour shades possible on request.

Subject to technical changes

For more informations or orders contact with us.

For more informations or orders
contact with us.