• Fast - continuous performance - maintenance free
• Developed through field experience
• Ease of operation - quick set-up
• The loading and discharge unit does not need to be exchanged when converting for other body diameters
• Minimal space requirements due to compact size
• World-wide standardized parts
• Festo control system - meaning world-wide service network
• The machine can be maintained and repaired by a machine fitter or work mechanic
• Spare parts can be produced by the owner.
  No cast components.
  Very important for foreign sales.

Technical data:

Driving motor:	1,1 kW, 2800 N
Grinding spindle speed:	4530 revs.= 47 Metres
Grinding wheel:	CBN=Borazon
Grinding wheel diameter:	200 dia. coating width 2 mm, coating height 5 mm
Tooth pitch:	from 6 mm to 100 mm
Hook angle range:	- 15° + 25°
Cycle time:	4 - 8 secs. depending on saw body thickness and stock removal
Cycle time during loading and discharge: 15 - 16 secs
Grinding feed:	Steplessly adjustable
Rapid traverse:	Steplessly adjustable
Max. pre-loading height of the loading trolley:	Saw blade body stack height 450 mm
Control system:	hydropneumatic Festo control
Air consumption:	approx. 40 Litres per Minute.
Air consumption during loading and unloading: appr. 60 litres
Operating voltage:	230/ 400 Volts, 50 cycles or 230/ 440 V, 60 cycles
Fusing:	3x16 Amp. time lag
Rated output:	1,4 kW
Coolant capazity:	63 Litres
Dimensions:	height 200 cm, width 240 cm, depth 200 cm
Weight:	825 kg
Colour:	Green hammertone, malachite green.
	Other colour shades possible on request.

On request, a second program can be fitted in the machine. This machine type is equipped to permit clamping of 4 saw blade bodies simultaneously, and grinding of up to 4 plate seats during the downward movement of the grinding wheel.Only possible with manual operation, i.e. the loading unit is switched off.