| |
Brazing Device Type ML 1000 WS with HU 5000
Brazing device ML 1000 WS, illustrated with High Frequency Converter HU 5000, 5 KW + cooling unit
This brazing device is used in particular for the brazing in and out of broaching cutting edges
on saw blades used particulary in the sawmill sector.An important feature of the device is that
it permits all brazed in and out. The device is offered with a varety of generator capacities:
2 KW, 3 KW, 5 KW, 6 KW and 10 KW.It is advisable to use a cooling unit for the cooling water
of the type required with HF generators. As an alternative, we also offer a cooling water tank
and pressure pump with alternatively 200 or 450 litres capacity. Connection to an existing water
pump is only advisable if an independent building water supply exists.Water containing high
levels of lime is not recommended.On request, it is possible to mount a temperature measurement
and control device.Particularly important is the capacity of the generator. As a general rule
of thumb, the longer the cutting edge, the more powerful the generator.With brazing in, ensure
that the cutting edge is heated with the saw body as quickly as possible. The ensures that the
generated heat does not penetrate into the saw blade body and bring about a danger of
warping
Technical data
| Min. saw dia.: | 200 mm |
| Max. saw dia.: | 800 mm, optionally 1000 mm |
| Min. cutting edge length: | 30 mm |
| Max. cutting edge length: | 200 mm |
| Heating time: | depending on generator capacity |
| Resetting time appr.: | ca. 5 minutes |
Subject to technical changes
For more informations or orders
contact with us.
© E. Petschauer Ltd 2000, D-72411 Bodelshausen, Latest alteration: March 2 2000
|