Two pneumatic cylinders, mounted on each side of the fixed center spindle, flex the saw hollow. The amount of deflection is measured by a dial indicator. The value from the dial indicator is in direct relation to the tension of the saw and allows therefore to compare one saw with another.
Universal test stand for checking top or side runout and tension on saw blanks, finished carbide tipped saws or segmental saws from dia. 100 mm to 800 mm.
This test stand is normally used by manufacturers of saw bodies or finished saws. The saw body is clamped via pneumatic cylinder, actuated by a foot valve, for quick and easy change. This feature allows large volume checking in production facilities.
Standard equipment contains the following:
one set of saw flanges dia. 50 mm, 80 mm, 100 mm, 120 mm, 150 mm;
one centering collar dia. 16 x 30 x 4 mm.
At additional charge available:
flanges with dia. 200 mm and 250 mm (other size on request)
Technical data:
| Saw blade dia.: | 100 mm to 800 mm |
| Pressure line: | 6 mm hose |
| Pressure required: | 6 bar |
| Air consumption: | minimal |
| Pressure regulation: | from 0 to 6 bar |
| Weight: | 220 kg |
| Dimensions: | 850 mm wide |
| 840 mm deep | |
| 350 mm deep with cylinder carrier | |
| 955 mm working high, 1300 mm total high |
Subject to technical changes
For more informations or orders
contact with us.
© E. Petschauer Ltd 2000, D-72411 Bodelshausen, Latest alteration: March 2 2000