KH 800 Keyway Punching Unit - E. Petschauer GmbH, Bodelshausen

KH 800 Keyway Punching Unit

Technical Data

• Largest sawblade diameter 800 mm, smallest 150 mm.
• 6 Punching widths: 8, 10, 12, 15, 20 and 22 mm.
• Other keyway widths on application.

The machine is equipped with a handwheel with scale for the purpose
of adjusting the depth of the keyway.
3 Punch guides are supplied, together with three hardened punches
measuring 8 x 10 x 80, 10 x 15 x 80 and 20 x 22 x 80, together with
1 Bottom die: 8, 10, 12, 15, 20 and 22 mm, usable on both sides,and 1 Heavy,
short-handled hammer, minimum weight 5 kg (to knock out the keyways).

In this connection, it must be stated that the machine is only suitable for
mass production with reservations.
As a combination, we can also supply a fixture for resharpening the punches.

Directions for use:

After the punch of the correct size has been selected and
the depth of the keyway set, the punch guide and punch are brought into position.
The keyways are knocked out with a firm blow of the hammer.