Products
If you want more information, simply click on the desired product.
Special Machine PLS 2200 for pocket grinding or cutoff operation on oversized carbide teeth after brazing
An inexpensive solution: This machine is excellently suited to the regrinding or grinding in of plate seats on HM saws,irrespective of whether they require repairing or are new.The diameter range is 700-2000mm.A special feature that should be emphasised is that a conventional index advance,i.e.an index cylinder with a pitch distribution scale and possibly cams or […]
Double-sided Flank-grinding Machine FS 800
The machine has been especially developed in order to bring HM-equipped disposable sawblades to a certain sawing width and to level them out after their tooth flanks have been placed in a clamp.The machine is equipped with a fully closed cowling including a coolant system. Technical data: Weight: 420 kg Dimensions: Length 1050 mm Width […]
Manual Polishing Machine PLM 600 – 800
This machine is used to polish soiled or rusty saw blades of all kinds, or for the removal of cold welds.However, it is also suitable for treating new blades. We ofter two model sizes of this machine. For the model PLM 600, the maximum polishing range is 600 mm dia., and for the model PLM […]
RP 800 / RP 2000 Concentric and Transverse Running Test Unit
RP 800 RP 2000 For all types of circular saw blades from 80 – 800 mm dia. Accessories: 1 set of flanges 50 mm dia., 80 mm dia., 100 mm dia., 120 mm dia., 150 mm dia Optionally available at an extra charge 200 mm dia., and 250 mm dia. flanges For all types of […]
Tension Testing Device with Axial and Radial Runout Testing Device
SP 800 S SP 1600 S These testing devices are suitable for the testing of all types of circular saw blades wherever tension problems, or axial and radial runout can occur. Suitable for the manufacture of new blades or for sharpening and repair services. We offer 5 different device sizes: SP 800 S testing range […]
Typ SP 800 P Test Device for Tension, Top and Side Run out
Tension tester with runout and axial runout testing device With pneumatic blade clamping for saws from 150 mm Ø to 800 mm Ø. How to check tension: The blade is pressed hollow in the clamped state by 2 opposing pneumatic cylinders. cylinders, a dial gauge indicates the value. A universal tester for checking the concentricity, […]
SRP 800 Straightening Work Station
The workstation is equipped as follows: 1 Workbench, with choice of drawer cabinet on right or left side 1 Anvil with hardened, rectangular striking face, 250 x 150 mm. The striking face can be replaced with a convex striking face, diameter 150 mm (standard size) by loosening two screws. Needless to say, other diameters and […]
Typ SW 800 S Tension Rolling Machine
Tensioning roller SW 800 for rolling in tensioning rings on saw bodies of any kind. Smallest rolling circle Ø 160 mm. Throat depth: 350 mm. Max. saws Ø 800 mm. Max. rolling pressure approx. 10 t . Drive power 2,2 KW via gear motor with 46/min. Hydraulic power unit: Max 200 bar pressure. Stepless pressure […]
Sandblasting Cabin Model SK 800 II and SK 800 III
Model II and III are specifically designed for clamping one saw blade only. Therefore, air consumption is smaller. Cabin dimensions: 800 mm wide, 1700 mm high, 1100 mm deep. Cabin dimensions: 800 mm wide, 1700 mm tall, 1100 mm deep Duration of sandblasting: Example: Saw blade of diameter 350 Ø Z 54 will be sandwich […]
Sandblasting Cabin Model SK 800 I
This cabin is specifically designed to simultaneously sandblasting two saw blades in one clamping. Duration of sandblasting: Example: Saw blades of diameter 350 Ø Z 54, ready in two minutes Set-up time: 3 – 4 minutes For unclamping and clamping: Press the foot valve and take one saw blades into each hand. Sandblasting proceeds automatically […]
SW 2000 Hydraulic Tension Rolling Machine
Combination top/side runout and tension testing. Design features High strength, welded construction. Hydraulic pressure with pressure preset function. The rolling process is controlled by encoder and does not depend on the saw diameter, i.e., after exactly one revolution the machine stops automatically. This prevents under or over rolling. Stable sawblade mounting assembly with spindle driven […]
Hydraulic Tension Rolling Machine SW 800 MB
For circular saws or saw blanks with automatic loading and unloading unit. This machine was developed through field-experience Plain, economical technology Simple to operate Quick change over Capable of manual operation in case of automatic loading malfunctions Simple retrofitting of the automatic loading unit on existing tension rolling machines. Technical data: Saw blade dia.: 160 […]
