Petschauer
Special Machines If you want more information, simply click on the desired product.
Economic solution for blasting large saws from 500 mm to 2000 mm in diameter As shown in the picture the saw enters the blasting cabinet through a on the side panel. The saw carrier moves lightly on a roller guide left and right. The carrier is fitted with an adjustable stop for easy repositioning of […]
A fully automatic sand blaster for carbide tipped saw blades from diameter 100 mm to 800 mm (4″ to 31-1/2″), with material handler for automatic loading and unloading of saw with diameter 150 mm to 500 mm (6″ to 19-1/2″). This is a new design with a cost effective solution. does not have a complicated […]
For the setting of circular saw blades for tooth forms A (wolf tooth) and B (pointed tooth) of 450-2000mm. Technical Data: Min. saw-blade diameter 450 mm Max. saw-blade diameter 2000 mm Max. pressing pressure 200 bar Hydraulic drive: 2.2 kW Saw blade drive: 0.55 kW Operating voltage: 230/400 V, 50 cycles […]
This cabin is used wherever saw blades are produced in large quantities. As is clearly iltustrated in the photo, this machine is fitted with 2 loading and unloading stations, i. e. 2 saw blades are automatically moved into position and sand blasted.It is important to mention here that the setting of the saw blade diameter […]
The ADM 800 is especially suited for machining the bores of carbide tipped or steel saw blades and saw bodies with a diameter from 80 mm to 800 mm. Mounting the saw blade is quick using a centering shaft, which mates with the center bore in a round permanent magnet. The permanent magnet holds the […]
Largest sawblade diameter 800 mm, smallest 150 mm. 6 Punching widths: 8, 10, 12, 15, 20 and 22 mm. Other keyway widths on application. The machine is equipped with a handwheel with scale for the purpose of adjusting the depth of the keyway. 3 Punch guides are supplied, together with three hardened punches measuring 8 […]
Rivet Inserting and Removal Machine with Lift and Swivel Device for Segmented Saw Blades from 200 to 2000 mm Ø The pictured model is equipped with a hydraulic rivet removal unit, height adjustable with a manual lever. On the opposite side is an orbital riveting machine for riveting of replacement segments. A swivel is fitted […]
This machine is particularly suitable for copper rivets in special saw blades (predominantly of the type used for cutting aluminum) in order to counteract whistling noises. In addition, it can be used to insert and remove rivets from HSS elements of HSS sectional saw blades. Max. applied pressure: 9 tons Pressure adjustment […]
For brushing carbide tips or carbide teeth on carbide tipped circular saw blades for metal cutting operations. The machine is fitted with two protective guards permitting adjustment to the saw blade diameter. Technical data: Smallest saw blade dia.: 300 mm Largest saw blade dia.: 2000 mm Drive output gear motor: 0,18 kW approx. […]
The problem of making secondary and countersunk holes in metal-cutting saws etc. is a frequent one in tools companies, saw and saw base manufacturing and sharpening workshop. Drilling the holes is not a problem, but division? Or the reference diameter? The T 24 – 800 will solve the problem of difining the reference circle, dividing […]
Heating occurs in a continuous process. A cooling water system is required for cooling the generator or inductor that heats or hardens the teeth. There are 2 possibilities for this: Direct connection to the water main at a pressure of 3 bar. Only to be recommended if the water is not too cold and the […]
A compact machine for the resharpening of hard metal-faced saw bands with a width of 8-80mm. Technical data: Tooth pitch: 3-40mm Rake angle adjustment: between 10° negative and 25° positive Output power: Grinding motor 0.75KW, with infinitely variable speed control via a frequency converter Grinding wheel spindle drive: via the grinding spindle poly-V belt drive […]
Accessories and Material for the machines.
Technical Data Largest sawblade diameter 800 mm, smallest 150 mm. 6 Punching widths: 8, 10, 12, 15, 20 and 22 mm. Other keyway widths on application. The machine is equipped with a handwheel with scale for the purpose of adjusting the depth of the keyway. 3 Punch guides are supplied, together with three hardened punches […]
This machine is particularly suitable for installing copper rivets in special saw blades (predominantly of the type used for cutting aluminum) in order to counteract whistling noises. In addition, it can be used to insert and remove rivets from HSS elements of HSS sectional saw blades. Max. applied pressure: 9 tons Pressure adjustment from 0 […]
HAT I 2000 Rivet Inserting and Removal Machine with Lift and Swivel Device for Segmented Saw Blades from 200 to 2000 mm Ø The pictured model is equipped with a hydraulic rivet removal unit, height adjustable with a manual lever. On the opposite side is an orbital riveting machine for riveting of replacement segments. A […]
Heating occurs in a continuous process. A cooling water system is required for cooling the generator or inductor that heats or hardens the teeth. There are 3 possibilities for this: Direct connection to the water main at a pressure of 3 bar. Only to be recommended if the water is not too cold and the […]
The workstation is equipped as follows: 1 Workbench, with choice of drawer cabinet on right or left side 1 Anvil with hardened, rectangular striking face, 250 x 150 mm. The striking face can be replaced with a convex striking face, diameter 150 mm (standard size) by loosening two screws. Needless to say, other diameters and […]
The LA 20 solder cutting machine automatically cuts and bends silver solder. The silver solder is fed to the machine from a roll of flat stock bent 90° and cut to length. The length of the bent 90° part ist determined by the knife width. The total adjustable solder length is set at the step […]
Special Machine PLT 1700 – S for pocket grinding or cutoff operation on oversized carbide teeth after brazing This machine is ideal for cutting off carbide tips too long after brazing and to grind or rework tooth pockets on new saws or repairs, for saw diameter from 200 mm to 1700 mm. Example of machine […]
